Welcome to
ATSeries.net

MICROPROCESSOR-CONTROLLED
FLOAT BATTERY CHARGERS

Updated: Monday, January 29, 2024

new [ATevo Products]

[Other Industrial DC Products]
[AT10.1 / AT30 Products] legacy

[AutoCAD] [Custom Drawings]

AT10.1 / AT30 Series
[Electrical Features/Options] [Mechanical Options/Accessories]
[Service Instructions] [Application Notes] [Support Documents]

...NOTICE...  To view the AT10.1/AT30 Series documentation on this site, you will need
Adobe Acrobat Reader 5.0 (or greater) which you can download for free at Adobe.com.

To report any incorrect or missing information, please contact the ATSeries.net webmaster.

AT10.1 / AT30 BATTERY CHARGER
PRODUCT DOCUMENTATION

To better enable users to install, operate, and service their AT10.1 and AT30 Series battery chargers, we
have posted the Operating and Service Instruction manuals and Standard Drawings for reference.

To report any incorrect or missing information, please contact the ATSeries.net webmaster.

STANDARD DOCUMENT TYPE	OPERATING MANUAL	ELECTRICAL CONTROL DRAWINGS	ENCLOSURE OUTLINE DRAWING	INTERNAL LAYOUT DRAWING	SALES BROCHURE
PRODUCT LINE
AT10.1 SERIES (Group I - 1PH input)	JA0102-01 (6-25 Adc) *	ELECTRICAL DWGs	OUTLINE DWGs	INTERNAL DWGs	JF5006-01
AT10.1 SERIES (Group II - 1PH input)	JA0102-02 (30-100 Adc)	ELECTRICAL DWGs	OUTLINE DWGs	INTERNAL DWGs	JF5006-01
AT30 SERIES (3PH input)	JA0102-03 (25-1,000 Adc)	ELECTRICAL DWGs	OUTLINE DWGs	INTERNAL DWGs	JF5018-01
AT10.1/AT30 Series Communications Module	JA0102-04	DOCUMENT MATRIX (further support)			JF5026-00

* ...NOTICE...  In December 2001, the redesigned AT10.1 battery charger began shipping, replacing
the old AT10 product.  At that time, the AT10 operating manual was completely rewritten to reflect the
new design.  If you are still operating an older AT10 (not AT10.1) battery charger, you may download
the last revision of this product's operating manual (JA0102-00) for your records.

If you are interested in obtaining standard or custom drawings for an older AT10, AT10.1, or AT30
battery charger, please contact your sales representative.  Legacy documentation for this product is
always available for all earlier configurations of the charger, dating back to its introduction in early 1996.

[top]

INDUSTRIAL BATTERY CHARGER
PRODUCT DOCUMENTATION

STANDARD DOCUMENT TYPE	OPERATING MANUAL	ELECTRICAL CONTROL DRAWINGS	ENCLOSURE OUTLINE DRAWING	INTERNAL LAYOUT DRAWING
PRODUCT LINE
BEST BATTERY SELECTOR	JA5065-00	COMPLETE DRAWING MATRIX (steering diode assembly)
DC DISCONNECT	n/a	JE0544-XX (complete drawing matrix)
DC CONTROL PANEL	JA5117-01	COMPLETE DRAWING MATRIX
VENT / FAN CONTROLLER	JA5052-10	COMPLETE DRAWING MATRIX
RAILROAD MAINTENANCE CHARGER (RMC)	COMPLETE DOCUMENTATION MATRIX
UNIVERSAL MAINTENANCE CHARGER (UMC)	COMPLETE DOCUMENTATION MATRIX
SINGLE CELL CHGR	JA5004-00	JE5066-00	JE5065-00	n/a
TRAILER CONNECTION PANEL	JA5115-00	COMPLETE DRAWING MATRIX
DC DISTRIBUTION PANEL (CSA-compliant)	JA5117-00	JE5228-00 JE5228-10 JE5228-20	JE5227-00	JE5228-00 JE5228-10 JE5228-20
W	.	.

[top]

Updated: Monday, January 29, 2024 (view updates)

To report any incorrect or missing information, please contact the ATSeries.net webmaster.

Please bookmark this site and return to www.ATSeries.net as we post further information and keep
you updated on the world's most-trusted microprocessor-controlled stationary float battery charger.

SITE LAUNCH DATE:  09/06/2005

ELECTRICAL FEATURES AND OPTIONS

To better enable users to utilize certain features and options with their AT10.1 and
AT30 Series battery chargers that are not featured in the standard manuals, we have
posted the following Operating Instructions and Standard Drawings for your reference.

[top]

MECHANICAL OPTIONS AND ACCESSORIES

To better enable users to utilize certain features and options with their AT10.1 and
AT30 Series battery chargers that are not featured in the standard manuals, we have
posted the following Operating Instructions and Standard Drawings for your reference.

[top]

AT10.1/AT30 SERIES
BATTERY CHARGER SERVICE INSTRUCTIONS

To better enable users to service their AT10.1 and AT30 Series battery chargers, we have
posted the most commonly requested and most recently published Service Instructions.

[top]

AT10.1/AT30 SERIES
BATTERY CHARGER APPLICATION NOTES

To better enable users to understand the application of their AT10.1 and AT30 Series battery chargers,
we have posted the most commonly requested and most recently published Application Notes.

[top]

AT10.1/AT30 SERIES
BATTERY CHARGER SUPPORT DOCUMENTATION

Finally, we have posted a number of miscellaneous Support Documents for the AT10.1 and
AT30 Series battery chargers, which do not fit into any of the above categories.  Enjoy!

[top]

AT10.1 SERIES BATTERY CHARGER
 SINGLE PHASE INPUT - MICROPROCESSOR CONTROLLED
GROUP I (6-25 Adc OUTPUT)

ELECTRICAL / CONTROL DRAWINGS

If these standard documents do not meet your needs, a customized schematic and/or connection diagram
is available upon request, based upon any previously-supplied AT10.1 battery charger, or current battery
charger quote.  Please contact your sales representative with the serial number of the supplied unit, or the
ordering code and specifications of the quote in question.  Specifications are subject to change.

...NOTICE...  In July 2004, the rectifier assembly for the AT10.1 Group I battery charger was redesigned.
The online electrical / control drawings listed above reflect the current configuration of the AT10.1 Group I
battery charger with this new assembly.  If you are interested in obtaining standard drawings for an
AT10.1 Group I battery charger shipped prior to this date, please contact your sales representative.
Legacy documentation for the AT10.1 Series battery charger is always available for
all configurations of this product, dating back to its introduction in early 1996.

[top]

AT10.1 SERIES BATTERY CHARGER
SINGLE PHASE INPUT - MICROPROCESSOR CONTROLLED
GROUP I (6-25 Adc OUTPUT)

ENCLOSURE OUTLINE DRAWINGS
(standard NEMA TYPE-1 / IP20)
[ Style-586 / Style-594 ]

CABINET OUTLINE DRAWINGS
(NEMA TYPE-4 / IP55)

AT10.1 SERIES GROUP I BATTERY CHARGERS ARE ALSO AVAILABLE
HOUSED IN SPECIAL NEMA TYPE-4 (12/13) ENCLOSURES.  PLEASE REFER
TO THE FOLLOWING STANDARD DRAWING FOR CABINET DETAILS.

[top]

AT10.1 SERIES BATTERY CHARGER
SINGLE PHASE INPUT - MICROPROCESSOR CONTROLLED
GROUP I (6-25 Adc OUTPUT)

INTERNAL COMPONENT LAYOUT DRAWINGS
[ Style-586 / Style-594 ]

...NOTICE...  In July 2004, the rectifier assembly for the AT10.1 Group I battery charger was redesigned.
The online internal layout drawings listed above reflect the current configuration of the AT10.1 Group I
battery charger with this new assembly.  If you are interested in obtaining standard drawings for an
AT10.1 Group I battery charger shipped prior to this date, please contact your sales representative.
Legacy documentation for the AT10.1 Series battery charger is always available for
all configurations of this product, dating back to its introduction in early 1996.

[top]

AT10.1 SERIES BATTERY CHARGER
 SINGLE PHASE INPUT - MICROPROCESSOR CONTROLLED
GROUP II (30-100 Adc OUTPUT)

ELECTRICAL / CONTROL DRAWINGS

If these standard documents do not meet your needs, a customized schematic and/or connection diagram
is available upon request, based upon any previously-supplied AT10.1 battery charger, or current battery
charger quote.  Please contact your sales representative with the serial number of the supplied unit, or the
ordering code and specifications of the quote in question.  Specifications are subject to change.

[top]

AT10.1 SERIES BATTERY CHARGER
 SINGLE PHASE INPUT - MICROPROCESSOR CONTROLLED
GROUP II (30-100 Adc OUTPUT)

ENCLOSURE OUTLINE DRAWINGS
(standard NEMA TYPE-1 / IP20)
[ Style-5017 / Style-5018 ]

CABINET OUTLINE DRAWINGS
(NEMA TYPE-4 / IP55)

AT10.1 SERIES GROUP II BATTERY CHARGERS ARE ALSO AVAILABLE
HOUSED IN SPECIAL NEMA TYPE-4 (12/13) ENCLOSURES.  PLEASE REFER
TO THE FOLLOWING STANDARD DRAWING FOR CABINET DETAILS.

[top]

AT10.1 SERIES BATTERY CHARGER
SINGLE PHASE INPUT - MICROPROCESSOR CONTROLLED
GROUP II (30-100 Adc OUTPUT)

INTERNAL COMPONENT LAYOUT DRAWINGS
[ Style-5017 / Style-5018 ]

[top]

AT30 SERIES BATTERY CHARGER
THREE PHASE INPUT - MICROPROCESSOR CONTROLLED
(25-1,000 Adc OUTPUT)

ELECTRICAL / CONTROL DRAWINGS

If these standard documents do not meet your needs, a customized schematic and/or connection diagram
is available upon request, based upon any previously-supplied AT30 battery charger, or current battery
charger quote.  Please contact your sales representative with the serial number of the supplied unit, or the
ordering code and specifications of the quote in question.  Specifications are subject to change.

[top]

AT30 SERIES BATTERY CHARGER
 THREE PHASE INPUT - MICROPROCESSOR CONTROLLED
(25-1,000 Adc OUTPUT)

ENCLOSURE OUTLINE DRAWINGS
(standard NEMA TYPE-1 / IP20)
[ Style-5018 / Style-5030 / Style-163 / Style-198 ]

CABINET OUTLINE DRAWINGS
(NEMA TYPE-4 / IP55)

AT30 SERIES BATTERY CHARGERS ARE ALSO AVAILABLE
HOUSED IN SPECIAL NEMA TYPE-4 (12/13) ENCLOSURES.  PLEASE REFER
TO THE FOLLOWING STANDARD DRAWING FOR CABINET DETAILS.

* ...NOTICE...  AT30 outline drawings (JE5198-00 & JE5199-00) are of
preliminary designs, and are subject to change without notice.  Please contact
your sales representative, with a request for quote on such large custom battery chargers.

[top]

AT30 SERIES BATTERY CHARGER
 THREE PHASE INPUT - MICROPROCESSOR CONTROLLED
(25-1,000 Adc OUTPUT)

INTERNAL COMPONENT LAYOUT DRAWINGS
[ Style-5018 / Style-5030 / Style-163 / Style-198 ]

[top]

COMMUNICATIONS MODULE
(for AT10.1 / AT30 Microprocessor-Controlled Float Battery Charger)

DOCUMENT MATRIX

To report any incorrect or missing information, please contact the ATSeries.net webmaster.

[top]

BEST BATTERY SELECTOR
(Steering Diode or Auctioneering Diode Assembly)

(operating manual JA5065-00)

DRAWING MATRIX

dc current rating	ENCLOSURE OUTLINE DRAWING	INTERNAL LAYOUT DRAWING	ENCLOSURE OUTLINE DRAWING	INTERNAL LAYOUT DRAWING	dc current rating
50 Adc	JE5138-00	JE5139-00	JE5138-00	JE5139-00	50 Adc
100 Adc	JE5138-01	JE5139-01	JE5138-01	JE5139-01	100 Adc
200 Adc	JE5138-02	JE5139-02	JE5138-02	JE5139-02	200 Adc
500 Adc	JE5138-03	JE5139-03	JE5138-03	JE5139-03	500 Adc
750 Adc	JE5138-04	JE5139-04	N/A	N/A	800 Adc
1000 Adc	JE5138-05	JE5139-05	N/A	N/A	1000 Adc
	300 Vdc		600 Vdc

[top]

VENT / FAN CONTROL ASSEMBLY
(Equalize Voltage Sense)

(operating manual JA5052-10)

DRAWING MATRIX

vent/ fan contactor rating	dc bus voltage	assembly ordering p/n	ENCLOSURE OUTLINE DRAWING (Sheet 1 of 2)	INTERNAL COMPONENT LAYOUT (Sheet 2 of 2)	SCHEMATIC / CONNECTION DIAGRAM
10A	48	EJ5017-25	JE5119-25	JE5119-25	JE5120-25
10A	130	EJ5017-26	JE5119-26	JE5119-26	JE5120-26
20A	48	EJ5017-35	JE5119-35	JE5119-35	JE5120-35
20A	130	EJ5017-36	JE5119-36	JE5119-36	JE5120-36

[top]

DC CONTROL PANEL
(for dc load distribution)

(operating manual JA5117-01)

DRAWING MATRIX

enclosure type	height	# of branch ckt bkrs	# of main bkrs	type of main	DC Control Panel ordering p/n	ENCLOSURE OUTLINE DRAWING	INTERNAL COMPONENT LAYOUT
MH38	38.12in	1-12	0	LUG	DCP38LUGXXXXXX	JE5368-38	JE5369-30
MH38	38.12in	1-12	1	Hx2	DCP38100XXXXXX	JE5368-38	JE5369-31
MH38	38.12in	1-12	2	Hx2	DCP38100100XXX	JE5368-38	JE5369-32
MH38	38.12in	1-12	3	Hx2	DCP38100100100	JE5368-38	JE5369-33
MH38	38.12in	1-12	1	Jx2	DCP38200XXXXXX	JE5368-38	JE5369-36
MH38	38.12in	1-12	2	Jx2	DCP38200200XXX	JE5368-38	JE5369-37
MH38	38.12in	1-12	3	Jx2	DCP38200200200	JE5368-38	JE5369-38
MH56	56.12in	13-24	0	LUG	DCP56LUGXXXXXX	JE5368-56	JE5369-50
MH56	56.12in	13-24	1	Hx2	DCP56100XXXXXX	JE5368-56	JE5369-51
MH56	56.12in	13-24	2	Hx2	DCP56100100XXX	JE5368-56	JE5369-52
MH56	56.12in	13-24	3	Hx2	DCP56100100100	JE5368-56	JE5369-53
MH56	56.12in	13-24	1	Jx2	DCP56200XXXXXX	JE5368-56	JE5369-56
MH56	56.12in	13-24	2	Jx2	DCP56200200XXX	JE5368-56	JE5369-57
MH56	56.12in	13-24	3	Jx2	DCP56200200200	JE5368-56	JE5369-58

[top]

TRAILER CONNECTION PANEL
(for use with EPIC Mobile DC System)

(operating manual JA5115-00)

DRAWING MATRIX

protection devices	dc output connections	panel ordering p/n	ENCLOSURE OUTLINE DRAWING	INTERNAL COMPONENT LAYOUT	SCHEMATIC / CONNECTION DIAGRAM
N/A	single	EJ5276-00	JE5277-10	JE5278-11	JE5279-11
N/A	dual	EJ5276-01	JE5277-20	JE5278-21	JE5279-21
bkrs / switches	single	EJ5276-10	JE5277-10	JE5278-12	JE5279-12
bkrs / switches	dual	EJ5276-11	JE5277-20	JE5278-22	JE5279-22

[top]

AutoCAD (DWG) File Format Note

The manufacturer of AT10.1/AT30 Series battery charger products maintains a corporate policy of not
posting online e-files of the standard documentation on this site in AutoCAD (DWG or DXF) format.
If you wish to obtain any of the PDF files listed below, or a full  Customized Record Drawing Package
for your AT10.1/AT30 Series product, in a file format other than Adobe Acrobat (PDF),
please contact your Sales Representative for ordering information.

To report any incorrect or missing information, please contact the ATSeries.net webmaster.

[top]

[AT10.1 / AT30 Charger Products] [ATevo]
[Electrical Features/Options] [Mechanical Options/Accessories]
[Service Instructions] [Application Notes] [Support Documents]
[AutoCAD] [Documentation Update History] [Custom Drawings]

To report any incorrect or missing information, please contact the ATSeries.net webmaster.

...NOTICE...  To view the AT10.1/AT30 Series documentation on this site, you will need
Adobe Acrobat Reader 5.0 (or greater) which you can download for free at Adobe.com.